Idiomas disponibles
Idiomas disponibles
Troubleshooting
Error
Cause
code
204
Calculation error
220
Batteries low
Received signal too
255
weak or measuring
time too long
Received signal too
256
strong
Outside the measur-
261
ing range
500
Hardware fault
│
GB │ IE
■
24
Remedy
Repeat the procedure.
Replace the batteries.
Avoid non-reflective or poorly
reflecting surfaces. Find a
measurement point that is more
reflective (use white paper).
Avoid highly reflective or mir-
rored surfaces. Find a measure-
ment point that is less reflective
(do not aim at a bright light).
Stay within the maximum meas-
uring range of the device.
Switch the product off and back
on again. If the error code
still appears despite repeated
switching on and off, contact
the Service hotline.
PLEM 50 C4
