Idiomas disponibles
Idiomas disponibles
The corresponding line in the double Pythagoras symbol
flashes for the individual measured values. Immediately after the third
measurement, the calculated length is shown in the result line s of
the display 1 and the corresponding line of the double Pythagoras
symbol
g stops flashing. The individual measured values are
shown in the top three lines of the display 1.
Note: Please note that angular errors (not a right angle) will lead
to incorrect results. Ensure that the measured distances lie on a
plane (alignment).
Addition (plus)
♦
To add two individual values, take a measurement (length, area or
volume) so that a value is shown on the display 1.
♦
Press the Add/Subtract button
The plus symbol flashes in measured value line 3 a on the
display 1.
♦
Take a second measurement (length, area or volume). The second
measured value will be shown in measured value line 3 a on the
display 1. Immediately after the second measurement, the result
of the addition is shown in the result line s of the display 1. The
first measured value will be shown in measured value line 2 p on
the display 1.
│
GB │ IE
■
20
5 to start the addition (plus).
g
PLEM 50 C4
