Parkside PLEM 50 C4 Instrucciones De Uso página 25

Measured value memory
All measured and calculated values are automatically stored in the
memory of the device. The values are stored along with their unit
(length, area or volume). Calculated values are stored together with
the respective individual values.
There are a total of 100 memory locations available. Once all 100
memory locations have been filled, the oldest measured value is
overwritten with the most recent data record.
Loading measured values from the measured
value memory
The measured value memory allows quick access to a single memory
value. If you need to use a value multiple times, the measured value
memory is the ideal solution.
♦ Press the Save button
The memory symbol
corresponding memory location number is shown in the memory
location line b.
Note: The most recently saved data record always has memory
location number 01.
♦ Press the Save button
record.
♦ Hold the Save button
quickly skip down through the saved data records from 10 to
20 to 30....100.
Note: The data record "100" is shown on the display as "00"
(not "100").
│ GB │ IE
■ 22
7 to show the last saved data record.
M is shown on the display 1, and the
7 again to switch to the next data
7 for longer than two seconds to
PLEM 50 C4