Idiomas disponibles
Idiomas disponibles
CONTROLS AND INDICATORS
MASTER Power Switch
The unit features a master power switch in
the upper left corner of the control panel.
This switch turns the entire unit ON or OFF.
Please remember that all battery connections
and disconnections should be performed with
the unit unplugged, in addition to this switch
being off.
FUNCTION Selection Switch
The Function Selection Switch changes the
VOLTMETER
functional mode of operation, allowing the
section of Standard/Flooded battery charging
(multiple rates), AGM/Spiral Wound battery charging (multiple rates), Power Supply (PS) mode or Engine Start
assistance.
MODE Selection Button
The Mode Selection Switch allows the operator to specify the parameters of their chosen function when
Charging or PS Mode is the chosen function. In Charge functions, parameters include Auto, Hold, or five
charge duration modes. In PS Mode, parameters include three system voltage target levels to match OE
requirements.
START/STOP Buttons
The START/STOP button is used to commence unit operation once all function and mode parameters have
been set to the desired value. The START/STOP button can also be used to discontinue operation at any time,
once operation has commenced. When the green LED indicator in the START/STOP button is lit, unit is active.
VOLTMETER
The voltmeter provides detailed information regarding the voltage of the connected battery(ies). This
information is helpful in all functional modes.
LED Status Lights
LED lights in the STATUS panel indicate the status of the chosen function once operation has commenced.
In addition, fault LEDs will alert the operator to unsafe operating conditions.
10
