Idiomas disponibles
Idiomas disponibles
1.
Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the us-
er to become familiar with the machine and take ad-
vantage of its application possibilities in accordance
with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, costly
repairs, reduce downtimes and how to increase relia-
bility and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
2. Device description (Fig. 1-19)
1.
Handle
2.
On/off switch
3.
Unlocking switch
4.
Machine head
5.
Moving saw blade guard
6.
Saw blade
7.
LED
8.
Laser
9.
Set screw for rotary table
10.
Stop rail
10a. Moveable stop rail
11.
Right workpiece support
11a.
Left workpiece support
11b.
Philips screw for workpiece support
12.
Set screw for workpiece support
13.
Set screw for table insert extension
14.
Table insert extension
15.
Pointer
16.
Scale
17.
Rotary table
18.
fixed saw table
19.
Clamping device
20.
Set screw for cable routing
20a. Cable routing
21.
Dust bag
22.
Clamping grip
23.
Adjusting screw (45°)
24.
Adjusting screw (90°)
25.
Bracket for table insert extension
26.
Pointer
27.
Scale
28.
Laser & LED on/off switch
29.
Stop for cutting depth limiting
30.
Screw for cutting depth limiting
31.
Pin
www.scheppach.com
GB | 25
