Butler KENDO.30LIGHT Manual De Instrucciones página 40

IN ORDER TO ALLOW A LONGER
LIFE OF THE FILTER AND OF ALL
MOVING PNEUMATIC DEVICES,
YOU HAVE TO MAKE SURE THAT
THE SUPPLIED AIR IS:
• EXEMPT FROM THE LUBRICAT-
ING OIL OF THE COMPRESSOR;
• EXEMPT FROM HUMIDITY;
• EXEMPT FROM IMPURITY.
• Periodically, with a frequency of at least once a month,
lubricate the arms of the bead breaking rolls.
• Immediately replace worn parts, bead breaking rolls,
assembly tools, feeler pins.
• Every week and/or when necessary, top up the oil tank
using the filler hole provided closed by a cap or screw
on the lubricator filter.
N.B: This operation should not be carried out by
unscrewing the cup of the lubricator filter.
• The use of synthetic oil might damage the pressure
regulator filter.
• At regular intervals, (at least every 100 working hours)
check reduction gear (Fig. 46 pos. 1) lubricating oil
level. Such operation must be effectuated removing the
plug (Fig. 46 pos. 3), positioned on the provided hole
prearranged on the frame, and removing the plug po-
sitioned on reduction gear (Fig. 46 pos. 2).
INSTRUCTION, USE AND
MAINTENANCE MANUAL
7105-M002-0_B
Page 40 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
THE MANUFACTURER DOES NOT
ACCEPT ANY DAMAGE RESULT-
ING FROM THE FRAILURE TO
OBSERVE THE ABOVE INSTRUC-
TION, AND SUCH FAILURE
COULD INVALIDATE THE WAR-
RANTY!!
GB
Fig. 46