Reverse Wheel Pan Protection; Bead Breaking Through Vertical Rolls - Butler KENDO.30LIGHT Manual De Instrucciones

7105-M002-0_B
GB
Page 35 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
6. Lifting the shaft (Fig. 22 pos. 1) through the proper
handle (Fig. 22 pos. 2), turn the ring nut (Fig. 22
pos. 3) until the complete cone clamping (Fig. 22 pos.
4) on the wheel (Fig. 22 pos. 5).
7. For wheels with alloy rims, use a proper plastic guard
(Fig. 23 pos. 1).
Fig. 23

12.2.1 Reverse wheel pan protection

In case of use of reverse wheels, to protect the rim, ap-
ply on the rubber platform a protection made to a trans-
parent plastic material available on demand (Fig. 24
pos. 1). We suggest you a constant replacement of it and
in any case if there are visible damages (see Fig. 24).
INSTRUCTION, USE AND
MAINTENANCE MANUAL

12.3 Bead breaking through vertical rolls

1. After the wheel has been locked, move upper bead
breaker roll (Fig. 25 Pos. 2) near to the rim edge
(Fig. 25 Pos. 1), pushing the push button (Fig. 14
Fig. 22
Pos. F2).
2. Determine the tools diameter (rolls and tool) using
the push button L and the lever M.
Fig. 25
3. Keep on the approaching movement, activating the
wheel rotation in clockwise sense (see Fig. 26)
pushing the pedal (Fig. 15 Pos. A) and in the same
time to operate the push button (Fig. 14 Pos. F2),
pushing it until the space is enough for the roll
advancement with the manual cam.
To operate the upper cam pushing the push button
(Fig. 14 Pos. D) and to continue the bead breaking
until the end of the operation.
Fig. 26
Fig. 24
1
4. Draw the lower roll (Fig. 27 Pos. 1) near the push
button (Fig. 14 Pos. G1).
2
1