Tyre Mounting - Butler KENDO.30LIGHT Manual De Instrucciones

Demounting the lower bead
To disassemble the lower tyre the lower roll can be used
alternatively. Lift the tool and go away from the working
area.
1. Lift the roll and the tyre just next to the rim edge (see
Fig. 36).
2. Therefore, move forward the roll through the provided
control (Fig. 14 Pos. E) so that it is inserted between
the rim edge and the lower bead (see Fig. 37).
Fig. 37
3. Then, rotate and complete the bead disassembly (see
Fig. 38).
Fig. 38
INSTRUCTION, USE AND
MAINTENANCE MANUAL

12.5 Tyre mounting

1. Lubricate the tyre's beads.
2. Position the tool (Fig. 39 Pos. 1) on the rim edge.
Fig. 36
3. Hook the lower bead on the tool then rotate in clock-
4. Then, position the upper bead on the tool assembly
5. Assemble the extension with entrainer near the edge
Page 38 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
Fig. 39
1
wise sense until the complete assembly.
area (Fig. 40 Pos. 1).
Fig. 40
1
rim (see Fig. 41).
7105-M002-0_B
GB
Fig. 41