Butler KENDO.30LIGHT Manual De Instrucciones página 37

7105-M002-0_B
GB
Page 37 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
Fig. 30
Fig. 31
4. Lift the tool through the provided control (Fig. 14
Pos. I). When the tool reaches a vertical position re-
lated to the rim (Fig. 32 Pos. 1), rotate the chuck so
that the tyre enters the rim groove. Keep on lifting
the tool until the bead is on the rim edge (see Fig.
31).
TO MAKE SURE THAT THE TOOL
IS ON DISASSEMBLY POSITION
(FIG. 31) BEFORE STARTING THE
CHUCK ROTATION.
1
INSTRUCTION, USE AND
MAINTENANCE MANUAL
5. Rotate in clockwise sense until the upper bead is
completely disassembled (see Fig. 33).
6. Lift the tool (see Fig. 34 Pos. 1) maintening it coupled
to the upper bead of the tyre with the lower roller.
Fig. 34
1
7. Place the tool (see Fig. 35 Pos. 1) near the rim edge.
Using the lower roller, load the lower bead on the tool
in demounting position.
Fig. 35
Fig. 32
8. Rotate the chuck in clockwise sense until the tyre is
completely disassembled.
1
Fig. 33