WAGNER SUPER FINISH 23 PRO Manual De Instrucciones página 47

Ocultar thumbs Ver también para SUPER FINISH 23 PRO:
Idiomas disponibles

Idiomas disponibles

Super Finish 23 Pro
HEA NOZZLES FOR LOW-MIST SPRAYING AT LOW PRESSURE
HEA stands for High Effi ciency Airless, an innovative nozzle technology revolutionising airless spraying. HEA nozzles allow the
pressure of the spray device to be reduced right down and allow it to work in the low-pressure range (ideally at 80 - 140 bar).
The nozzles can be used with all TradeTip 3 nozzle holders and WAGNER devices.
Some paints may need to be diluted to achieve the best result possible. The experts at Wagner application technology have
therefore tested a wide range of materials for you. Their recommendations can be found in the Wagner Spray Guide at sprayguide.
wagner-group.com.
Set the low pressure in the HEA range
and start.
HEA tip table
All of the tips in the table below are supplied together with the appropriate gun fi lter.
i
Application
Synthetic-resin paints
PVC paints
Paints, primers
Fillers
Fillers
Rust protection paints
Rust protection paints
Latex paints
Dispersions
Rust protection paints
Latex paints
Dispersions
Flame retardant
1) Spray width at about 30 cm to the object and 100 bar (10 MPa) pressure with synthetic-resin paint 20 DIN seconds.
When working with a HEA nozzle, a pressure setting of 50 - 150 bar / 5-15 MPa (area marked in green on the
i
You can find further accessories for optimised working at
pressure gauge) is recommended.
https://go.wagner-group.com/accessories-professional
Even spray pattern without spray edges.
Tip marking
Spray
angle
211
20°
311
30°
411
40°
213
20°
313
30°
413
40°
415
40°
515
50°
615
60°
417
40°
517
50°
617
60°
519
50°
619
60°
421
40°
521
50°
621
60°
If edges are visible, slowly increase the
pressure.
Bore
Spraying
inch / mm
width mm 1)
0.011 / 0.28
120
0.011 / 0.28
150
0.011 / 0.28
190
0.013 / 0.33
120
0.013 / 0.33
150
0.013 / 0.33
190
0.015 / 0.38
190
0.015 / 0.38
225
0.015 / 0.38
270
0.017 / 0.43
190
0.017 / 0.43
225
0.017 / 0.43
270
0.019 / 0.48
225
0.019 / 0.48
270
0.021 / 0.53
190
0.021 / 0.53
225
0.021 / 0.53
270
SPARE PARTS AND ACCESSORIES
Gun fi lter
Order no.
red
0554211
red
0554311
Rot
0554411
red
0554213
red
0554313
red
0554413
yellow
0554415
yellow
0554515
yellow
0554615
white
0554417
white
0554517
white
0554617
white
0554519
white
0554619
white
0554421
white
0554521
white
0554621
EN
47
loading