Emptying The Grass-Catcher - Sabo 92-13 H B Manual Del Operador

22
EN
– regulate the cutting height and speed (
(the height, density and dampness of the grass).
WARNING!
!
ensure safe conditions (
Whatever the conditions, always reduce the speed if you notice a drop in engine speed
– if you travel too fast compared to the amount of grass being cut, you will not be able
to mow the grass well.
Disengage the blades and raise the cutting deck as high as possible whenever you
need to get past an obstacle.

5.4.6 Emptying the grass-catcher

NOTE
done with the blades disengaged, otherwise
the engine stops.
Do not let the grass-catcher become too full as
this may block the collector channel.
When the grass-catcher is full you will hear a
sound warning. At this point:
– disengage the blades (
will stop;
– lower the engine speed;
– stop moving forward;
– engage the parking brake on slopes;
– pull out the lever (1) and tip up the grass-catcher to empty it;
– close the grass-catcher so that it hooks onto the pawl (2).
5.4.7 Unblocking the collector channel
Cutting very tall or wet grass, particularly at excessively high speed, can clog up the
collector channel. If this happens proceed as follows:
– stop moving forward, disengage the blades and stop the engine;
– remove the grass-catcher or stone-guard;
– remove the grass cuttings; you can reach them from the exit of the collector chan-
nel.
WARNING!
!
When cutting on sloping ground, reduce your speed to
1.2 - 5.5).
This operation can only be
4.7) and the sound
This job must only be performed with the engine turned off.
HOW TO USE THE MACHINE
4.8) considering the conditions of the lawn
1
2