Approved Combinations Of Cutting Attachment, Deflector, Handle And Harness - Stihl FS 40 Manual De Instrucciones

Approved Combinations of Cutting Attachment, Deflector, Handle and Harness

Cutting Attachment
1
3
Approved Combinations
The complete combination includes:
Cutting attachment
–
Deflector
–
Handle
–
Shoulder strap (special accessory
–
only)
Select correct combination from the
table according to the cutting
attachment you intend to use. Read the
table horizontally from left to right.
Cutting Attachments
Mowing heads
1 STIHL AutoCut C 5-2
2 STIHL AutoCut 5-2
3 STIHL PolyCut 6-3
4 STIHL FixCut 5-2
FS 40, FS 40 C, FS 50, FS 50 C
Deflector
2
4
Only mowing heads (1, 2, 3, 4) may be
used on trimmers with a curved drive
tube and loop handle.
Deflector
5 Deflector with blade for mowing
heads only (see "Mounting the
Deflector").
Handle
6 Loop handle
Harness
7 Shoulder strap may be used
Handle
5
6
Harness
7
Warning!
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of con-
trol and contact with the cutting
attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only mowing heads may be used on
loop-handled trimmers with a curved
drive tube.
English
15