Idiomas disponibles
Idiomas disponibles
16
Important!
–
For your own safety you must only use the acces-
sories and additional units listed in the operating
instructions or recommended or specified by the
manufacturer. The use of mounted tools or ac-
cessories other than those recommended in the
operating instructions or catalogue may place
your personal safety at risk.
17
Noise
Wear ear muffs when you use the compressor.
–
Replacing the power cable
18
–
To prevent hazards, leave the replacement of
damaged power cables strictly to the manufac-
turer or a qualified electrician. There is a risk of
electric shock!
19
Inflating tires
Directly after inflating tires, check the pressure
–
with a suitable pressure gauge, for example at
your filling station.
20
Roadworthy compressors for building site operations
–
Make sure that all lines and fittings are suitable for
the maximum permissible operating pressure of
the compressor.
Place of installation
21
–
Set up the compressor on an even surface.
22
Supply hoses at pressures above 7 bar should be
equipped with a safety cable (e.g. a wire rope).
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed air
and blasting guns
•
The compressor pump and lines can become very hot
during operation. Touching these parts will burn you.
•
The air which is sucked in by the compressor must be
kept free of impurities that could cause fires or explo-
sions in the compressor pump.
•
When releasing the hose coupling, hold the hose cou-
pling piece with your hand. This way, you can protect
yourself against injury from the rebounding hose.
•
Wear safety goggles when working with the blow-out
pistol. Foreign bodies or blown off parts can easily
cause injuries.
Do not blow at people with the blow-out pistol and do
•
not clean clothes while being worn. Risk of injury!
Safety information for paint spraying
•
Do not process any paints or solvents with a flash point
below 55° C. There is a risk of explosion!
Do not heat up paints or solvents. There is a risk of ex-
•
plosion!
•
If hazardous liquids are processed, wear protective fil-
ter units (face guards). Also, adhere to the safety infor-
mation provided by the manufacturers of such liquids.
•
The details and designations of the Ordinance on Haz-
ardous Substances, which are displayed on the outer
packaging of the processed material, must be ob-
served.
•
Additional protective measures are to be undertaken if
necessary, particularly the wearing of suitable clothing
and masks.
•
Do not smoke during the spraying process and/or in the
work area. There is a risk of explosion! Paint vapors are
easily combustible.
Never set up or operate the equipment in the vicinity of
•
a fire place, open lights or sparking machines.
•
Do not store or eat food and drink in the work area.
Paint vapors are harmful to your health.
•
The work area must exceed 30 m
tilation must be ensured during spraying and drying.
Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying
combustible or hazardous materials.
•
Do not process media such as white spirit, butyl alcohol
and methylene chloride with the PVC pressure hose.
These media will destroy the pressure hose.
Operating pressure vessels
•
You must keep your pressure vessel in good working
order, operate the vessel correctly, monitor the vessel,
carry out necessary maintenance and repair work im-
mediately and meet the relevant safety precautions.
•
The supervisory authority may enforce essential control
measures in individual cases.
A pressure vessel is not allowed to be used if it has
•
faults or deficiencies that can endanger workers or third
parties.
•
Check the pressure vessel for signs of rust and dam-
age each time before using. Do not use the compressor
with a damaged or rusty pressure vessel. If you discover
any damage, then please contact the customer service
workshop.
Do not lose these safety instructions
6. Technical data
Mains connection
Motor rating W
Operating mode
Compressor speed
Pressure vessel capacity (in liters)
Operating pressure
Theoretical intake capacity (l/min)
sound power level L
WA
uncertainty K
WA
Protection type
Weight of the unit in kg
Oil (15W 40) l
Max. altitude
(above mean sea level)
The noise emission values were measured in accordance
with EN ISO 3744.
Wear hearing protection.
The effects of noise can cause a loss of hearing.
and sufficient ven-
3
230 V ~ 50 Hz
1800
S1
2850 min
-1
24
approx. 8 bar
approx. 260
97 dB(A)
2,42 dB
IP20
approx. 27
approx. 0,3
1000 m
GB/IE
19
