Idiomas disponibles
Idiomas disponibles
Bar and chain combinations
The following cutting attachments are approved for the models Jonsered CS 2234 and CS 2238.
Length, inch
Pitch, inch
14
3/8
16
3/8
18
3/8
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws Jonsered CS 2234 and CS 2238 from 2009's serial numbers and onwards (the year is clearly stated in plain text
on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EG.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2001, EN ISO 11681-1:2004
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate
for EC type examination in accordance with annex IX, has the number: 0404/09/2048.
n addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The certificates have the numbers: 26/161/003 - CS 2234, 26/161/004 - CS 2238.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 29, 2009
Ronnie E. Goldman, Director of Engineering. (Authorized representative for Husqvarna AB and responsible for technical
documentation).
1154232-26 Rev.4 2012-02-13
TECHNICAL DATA
Bar
Gauge, mm
Max. nose radius
7T
1,3
7T
7T
Chain
Type
Length, drive links (no.)
52
Jonsered H37
56
62
English – 25
