Idiomas disponibles
Idiomas disponibles
English
28
Immunity test
Electrostatic discharge
(ESD)
IEC 61000-4-2
Radiated RF EM fields
IEC 61000-4-3
Proximity fields from RF
wireless communications
equipment
IEC 61000-4-3
RATED power frequency
magnetic fields IEC
61000-4-8
Electrical fast transient/
burst
IEC 61000-4-4
Surges
IEC 61000-4-5
Conducted disturbances
induced by RF fields
IEC 61000-4-6
Immunity test level
±8 kV contact
±15 kV air
10 V/m
80 MHz – 2.7 GHz
80 % AM at 1 kHz
385 (27), 450 (28), 710
(9), 745 (9), 780 (9), 810
(28), 870 (28), 930 (28),
1720 (28), 1845 (28),
1970 (28), 2450 (28),
5240 (9), 5500 (9), 5785
(9) MHz (V/m)
30 A/m
50 Hz or 60 Hz
±2 kV
100 kHz repetition
frequency
±1 kV Line-to-line
±2 kV Line-to-ground
3 Vrms, before
modulation is applied
0.15 MHz – 80 MHz
6 Vrms, before
modulation is applied, in
ISM and amateur radio
bands between 0.15
MHz and 80 MHz
80 % AM at 1 kHz
Electromagnetic environment -
guidance
Floors can be a source of static electricity.
When the air is very dry (<20 % RH) the user
is advised to prefer to use the device in a
room with concrete or wooden floor
(instead of using it in a room with a
synthetic floor).
The device is immune against any RF
wireless communication device such as
smart phone, Wi-Fi or Bluetooth device at a
distance of 30 cm (11.8 in) or more. Avoid a
closer distance as this may result in improper
operation.
Mains power quality expected of a typical
commercial or residential environment.
Mains power quality expected of a typical
commercial or residential environment.
