Silvercrest SGBR 1500 A1 Instrucciones De Uso página 38

Idiomas disponibles

Using the rotisserie

WARNING! RISK OF INJURY!

Always use the tongs w to insert the hot rotis-

►

serie z into the appliance or to remove it.

You can use the two skewer clamps t to ﬁ x the

■

food onto the rotisserie z. Loosen the restrainer r

on the skewer clamps t, push them so that the

food is ﬁ xed ﬁ rmly in between the clamps and

then screw the restrainer r tight again.

First push the end of the rotisserie z without the

■

notch into the drive 1 (Figure 1):

Fig. 1: Push the rotisserie z into the drive 1.

Then insert the other end of the rotisserie z with

■

the deep groove in the spit ﬁ tting 9 (Figure 2):

Fig. 2: Insert the rotisserie z in the spit ﬁ tting 9.

SGBR 1500 A1

NOTE

Always slide the baking tray q into the lower

►

rail when you use the rotisserie z.

This will collect any drips.

To remove the hot rotisserie z, grip with

■

the hooks at the end of the tongs w into the

recesses on the rotisserie z (Figure 3):

Fig. 3: Hooking the tongs w onto the rotisserie z

First lift the left-hand side of the rotisserie z out

■

of the spit ﬁ tting 9 and then pull the rotisserie z

from the drive 1.