The Scope And Suggestions For Uses; How To Select Tightening Torque - Hitachi DS 14DMR Instrucciones De Seguridad Y Manual De Instrucciones

THE SCOPE AND SUGGESTIONS FOR USES

Work
Wood
Drilling Steel
Aluminum
Small
screw
Screw
tightening Wood
screw

HOW TO SELECT TIGHTENING TORQUE

Cap
position
1 Approximately 18 in-lbs. (20 kg-cm)
4 Approximately 27 in-lbs. (31 kg-cm)
7 Approximately 37 in-lbs. (43 kg-cm)
10 Approximately 47 in-lbs. (54 kg-cm)
16 Approximately 67 in-lbs. (77 kg-cm)
22 Approximately 87 in-lbs. (100 kg-cm)
High speed: Approximately 106 in-lbs.
Low speed: Approximately 450 in-lbs.
Table 6
Cap position
1 – 22
1 –
Table 7
Tightening torque
(122 kg-cm)(DS14DMR)
Approximately 124 in-lbs.
(143 kg-cm)(DS18DMR)
(550 kg-cm)(DS14DMR)
Approximately 560 in-lbs.
(633 kg-cm)(DS18DMR)
Suggestions
Use for drilling purpose.
Use the bit and socket matching the screw
diameter.
Use after drilling a pilot hole.
English
Operation example
Machine screw
tightening.
Screw tightening for
soft wood material.
Screw tightening for
hard wood material.
Thick screw tightening.
When used as a drill.
27