Attaching The Holder - Pioneer SPH-T20BT Manual De Instrucciones

Attaching the holder

Please attach the holder after installing the main unit
into the dashboard.
1
Pull the cable out from the unit.
2
Stick the sheet on the main unit to cover the hole.
Cover the upper side or the lower side of the opening depending
on the installation position.
Covering the upper side
KM954ES.indb 5
Covering the lower side
3
Pass the cable through the hole in the center of the spacer.
There are two spacers. Add spacers when required for the depth.
If you are not using a spacer, skip ahead to step 5.
4
Align the slots on the back of the spacer with the projections of
the main unit and fix it (3 fixing points).
Fix to the upper side or the lower side, depending on the
installation position.
English
5
En
2019/11/6 10:19:58