Idiomas disponibles
Idiomas disponibles
Operating this unit
Basic Operations
Power ON/OFF
Turning the unit on
% Press SRC/OFF to turn the unit on.
Turning the unit off
% Press SRC/OFF and hold until the unit
turns off.
Selecting a source
You can select a source you want to listen to.
% Press SRC/OFF repeatedly to switch be-
tween the following sources.
XM (XM tuner)—SIRIUS (SIRIUS tuner)—
HD Radio (HD Radio tuner)—Tuner (tuner)—
DVD (DVD player/multi-DVD player)—CD
(built-in CD player)—Multi CD (multi-CD
player)—iPod (iPod connected with the inter-
face adapter)—USB1 (USB storage device 1)/
iPod1 (iPod 1 connected using USB input)—
USB2 (USB storage device 2)/iPod2 (iPod 2
connected using USB input)—EXT (external
unit 1)—EXT (external unit 2)—AUX1 (AUX1)
—AUX2 (AUX2)—BT Audio (BT audio)—TEL
(BT telephone)
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When the iPod is not connected to this
unit with the interface adapter.
— When AUX (auxiliary input) is set to off
(refer to page 29).
— When the BT Audio source is set to off
(refer to Activating the BT Audio source on
page 31).
! USB1/iPod1 and USB2/iPod2 are the same
operations. However, sources are different de-
pending on the terminal which has been con-
nected to.
! USB storage device or iPod connected to the
USB port 1 on the front panel is USB1/iPod1
source.
Regarding the position of USB port 1, refer to
Head unit on page 9.
! USB storage device or iPod connected to the
USB port 2 on the rear panel is USB2/iPod2
source.
Regarding the position of USB port 2, refer to
installation manual.
! If the HD Radio tuner is connected to this
unit, tuner source is skipped.
! When an USB storage device or iPod is not
connected to the USB port of this unit,
NO DEVICE is displayed.
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary setting on page 29).
! Charging the portable audio player using
car's DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
! External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
% Turn MULTI-CONTROL to adjust the
sound level.
Section
02
11
En
