Motorola MULTI-UNIT CHARGER Manual De Instrucciones página 6

Charger Indicator
No indication
Single green blink
Blinking red
Steady red
Blinking Orange
Blinking green
Steady green
Raised rail
Charging
contacts
Charging
indicator
Table 4: Battery Charging Indicators
Battery is inserted incorrectly.
Successful charger power-up.
Battery is unable to charge or not making proper contact.
Battery is in rapid-charge mode.
Battery is recognized by charger but is waiting to rapid charge.
(Either the battery voltage is too low due to over-discharge, or the
battery temperature is too low or too high to allow rapid charging.
When this condition is corrected, the battery will automatically
begin rapid charging).
Additional case for new ultra-high-capacity IMPRES Lithium-ion
(Li-ion) batteries. The new batteries have capacities exceeding
2000 mAh. After approximately 15 minutes, the LED may go into a
Flashing Red mode. Remove and reinsert to get another over-
discharge recovery period. This procedure may need to be
repeated several times.
Battery charging is tapering offcharged (typically charged
approximatelyto 90% or greater capacity).
Battery is nearly charged or charged.
Charging
pocket
Figure 1: Multi-Unit Charger
Description
Power receptacle
(located here)
4