Transport, Packaging And Storage - WIKA PG43SA-S Manual De Instrucciones

3. Safety / 4. Transport, packaging ...
Skilled personnel
Skilled personnel, authorised by the operator, are understood to
be personnel who, based on their technical training, knowledge
EN
of measurement and control technology and on their experience
and knowledge of country-specific regulations, current standards
and directives, are capable of carrying out the work described and
independently recognising potential hazards.

4. Transport, packaging and storage

4.1 Transport
Check the measuring instrument for any damage that may have been
caused by transport.
Obvious damage must be reported immediately.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging, especially the diaphragm protection (if avail-
able). This will provide optimum protection during transport (e.g.
cleaning, change in installation site, sending for repair).
8
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to
property can occur.
▶
When unloading packed goods upon delivery as well
as during internal transport, proceed carefully and
observe the symbols on the packaging.
▶
With internal transport, observe the instructions in
chapter 4.2 "Packaging and storage".
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C