Rohde ST 410 Instrucciones De Uso página 72

10.2.3. "Data transmission" indicator (ST 411 only)
Display
10.2.4. Establishing a connection via a Wi-Fi router [WPS function)] (ST 411 only)
Connecting the ST 411 control unit to a wireless network (Wi-Fi):
Step Description of the process
1 Switch the control unit off.
d
Press the key and switch on the
2
control unit.
3
Hold down the
Hold down the
4
appears in the main display.
d
5
Release the
6 Press the WPS key on the wireless router.
After a few seconds, "PAIR" disappears
from the main display and the control unit
7
shows normal information in the main
display.
The ST 411 control system is now
8 permanently connected to the wireless
network (Wi-Fi).
Connecting the computer, tablet or
9
smartphone to the Wi-Fi.
Description
The "Data transmission" indicator light flashes when information is being sent over the
wireless network.
d
key when switching on.
d
key until "PAIR"
key.
Remark
To connect the control unit to a wireless network (Wi-Fi).
Information on the WPS key on the wireless router can be
found in the router's instruction manual and generally on the
Internet.
If this procedure was unsuccessful, repeat the steps starting
with step 1 or try the connecting as described in Section
10.2.5.
Available networks can be searched for on the computer,
tablet or smartphone in the system settings.
70 / 291 - EN -