Rohde ST 410 Instrucciones De Uso página 69

10.1.3. Inserting & removing USB flash drives
The USB port (1) for inserting the USB flash drive is located on the top of
the housing, under an easily removable cover (2).
 Keep the USB port cover attached and plug it in when not in use.
 The USB flash drive may only be plugged into the controller or removed
when no data is being written to it.
 To insert and remove a USB flash drive, the controller does not have to be
switched off.
 The "USB flash drive plugged into USB port" indicator (3) on the top of the
housing goes out as soon as the flash drive is removed.
10.1.4. "Data transfer" indicator
Display
10.1.5. Real-Time clock function
 This data logger module incorporates an accurate battery-backed real-time clock to display the date and time of
day.
 It compensates for leap years.
 It does not automatically compensate for daylight saving in summer and winter.
 This clock is used to timestamp data within the data logger files. It is also used to date and time stamp the actual
file.
 Note:
The date and time stamp of the file is the time the file was last written to (not the time when the file was first
created).
 The battery is designed for a service life of around 10 years.
10.1.6. Setting the date & time
Requirements for setting:
1. Switch on the controller
2. No firing process in progress
Carry out setting:
Step Display
1
2
21.01
3
21.01
4
Description
The "data transfer" indicator flashes when information is being written to the USB flash
drive.
Segment display Description
Switch on the controller
Press the
for at least 5 seconds until "Date"
setting mode appears.
Navigate to the flashing digit with
01
the
01 Use the
the flashing number.
h
key and hold it down
g h
or key.
d f
and keys to change
67 / 291 - EN -
Remark
The date is shown in
"YY.MM.DD" format.
After the call-up, the numerical
value for the year flashes first.