Idiomas disponibles
Idiomas disponibles
User information:
For simple firing such as biscuit firing, two segments are sufficient, more complex firings such as crystal glazes or glass
production require several segments.
6.5.
Programming the control unit
6.5.1.
Changing the firing program
Display
Icon
20
Pr. 1
1
150
600
00. 15
2
Meaning
Description
If no firing is carried out, no element lights up in the program
sequence of the graphical display.
No program in
The firing indicator also does not light up.
operation
The main display shows the current firing chamber
temperature.
When you press the
the display.
The firing program can now be selected with the
keys.
Program number
By pressing the
be changed can be selected.
You can switch back to the previous value in each step by
pressing the
Indicator in the
The selected firing program always shows the first segment first.
segment display
The ramp rate in the main display appears as:
Heating ramp
This can be altered with the
The graphical display indicates whether a heating ramp or a
cooling ramp is being programmed.
Cooling ramp
Notes:
To change the heating ramp to a cooling ramp and vice versa,
see Section 6.4.2.
To program the ramp rate to "FULL" or "END", see Section
6.4.3.
To program the additional switch output see section 7.
Soak/Target
The next press of the
temperature
temperature.
This can be altered with the
The next push of the
"hours:minutes".
Soak time
This can be altered in the range 00:00 to 99:59 with the
and
The soak period indicator on the graphical display will flash.
Note:
To program the additional switch output see section 7.
Indicator in the
The next press of the
segment display
digit and firing values for the next segment can be entered.
54 / 291 - EN -
g
key, the program number lights up on
g
key again, the program number which is to
h
key.
"1°C/h-999°C/h" or
"FULL" or
"END"
g
key displays the soak or target
g
key displays the soak period in
f
keys.
g
key increments the segment number
d
and
d
f
&
keys.
d
f
&
keys.
f
d
