Idiomas disponibles
Idiomas disponibles
Installation
7
Installation
7.1
Installation instructions
!
WARNING! Danger of injury due to live electrical components!
• When connecting the electrical components, there is a risk of electric
shock. Before starting any installation work, disconnect the battery and
make sure that no voltage can be transferred to the electrical components.
• Improper interventions, such as the use of branch connectors in the vehi-
cle's electrical system and electronics system, can lead to impairment of the
functions. This can lead to the failure of vehicle-mounted components or
vehicle safety equipment and as a result to accidents involving personal
injury or damage to the vehicle.
!
CAUTION!
The transport refrigeration system may only be installed by qualified personnel
from a specialist company. The following information is intended for techni-
cians who are familiar with the guidelines and safety precautions to be applied.
7.1.1
Information before installation
• Before installation, check whether any vehicle components could be dam-
aged or have their function impaired as a result of the installation.
• Check the completeness of the Frigo DC VAK according to the scope of
delivery.
• When installing the transport refrigeration system and the electrical connec-
tion, observe the original instructions of the vehicle manufacturer and the
instructions of the vehicle body manufacturer for the equipping of refriger-
ated vehicles.
7.2
Standard tightening torques
A
NOTICE!
Do not exceed the specified tightening torque under any circumstances. This
is the only way to avoid unintentional loosening of screw connections or tear at
high loads, if the fasteners were tightened too tight.
6
Frigo DC VAK
EN
