Idiomas disponibles
Idiomas disponibles
Product Instructions
Spare parts
Exploded views and spare parts lists are available at https://www.desouttertools.com/service/spare-parts.
The use of spare parts other than those originally supplied by the manufacturer may result in a drop in performance or in
increased maintenance and level of vibration and in the full cancellation of the manufacturer's liability.
Related products
Delta 1D, 6D or 7D data analyzer (minimum firmware version 2.8x)
ELRT (E-pulse electric pulse tools)
DeltaQC Software (programming and traceability of tests) - (minimum software version 4.3.x)
Cables
Oil bath removal
Follow the instructions below to remove the oil bath for cleaning/discharching of the oil:
1.
Make sure the FCT screw is slightly loosen, otherwise the nutsert/trasducer connection is under load and it
will be impossible to remove the locking pin.
2.
Using a flat screwdriver, remove the blind plugs protecting the locking pin to gain access to the inner axis:
3.
Insert a M5 screw into the locking pin housing and use it to pull out the locking pin:
09/2020
10 / 216
