Idiomas disponibles
Idiomas disponibles
• Assembly material:
- 4 hexagonal bolts
- 4 spring washers
- 4 washers
- 4 nuts
• Operating manual
4. Proper use
The lathe is used for working wood with suitable
wood-turning chisels.
The clamped workpieces are rotated, whereby various
different speeds can be set. Please refer to the follow-
ing descriptions for the function of the controls.
The machine complies with the applicable EC machin-
ery directive.
• The safety, operating and maintenance specifica-
tions of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
• The applicable accident prevention regulations and
the other generally accepted safety rules must be
observed.
• The machine may only be used, maintained or re-
paired by competent persons who are familiar with
it and have been informed of the dangers. Any li-
ability of the manufacturer for damages resulting
from arbitrary changes to the machine is excluded.
• The machine may only be operated with original ac-
cessories and original tools from the manufacturer.
• Any use beyond this is improper use. The manufac-
turer is not responsible for the resultant damages,
the user bears this risk alone.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
5. General safety information
Attention! The following basic safety measures must
be observed when using electric tools for protection
against electric shock, and the risk of injury and fire.
Read all these notices before using the electric tool
and keep the safety instructions for later reference.
22 | GB
Safe work
1.
Keep the work area orderly
– Disorder in the work area can lead to accidents.
2.
Take environmental influences into account
– Do not expose electric tools to rain.
– Do not use electric tools in a damp or wet envi-
ronment.
– Make sure that the work area is well-illuminated.
– Do not use electric tools where there is a risk of
fire or explosion.
3.
Protect yourself from electric shock
– Avoid physical contact with earthed parts (e.g.
pipes, radiators, electric ranges, cooling units).
4.
Keep children away
– Do not allow other persons to touch the equipment
or cable, keep them away from your work area.
5.
Securely store unused electric tools
– Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of chil-
dren.
6.
Do not overload your electric tool
– They work better and more safely in the specified
output range.
7.
Use the correct electric tool
– Do not use low-output electric tools for heavy
work.
– Do not use the electric tool for purposes for which
it is not intended. For example, do not use hand-
held circular saws for the cutting of branches or
logs.
– Do not use the electric tool to cut firewood.
8.
Wear suitable clothing
– Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
– When working outdoors, anti-slip footwear is rec-
ommended.
– Tie long hair back in a hair net.
9.
Use protective equipment
– Wear protective goggles.
– Wear a mask when carrying out dust-creating
work.
10. Connect the dust extraction device if you will be
processing wood, materials similar to wood, or
plastics.
– If connections for dust extraction and a collecting
device are present, make sure that they are con-
nected and used properly.
– When processing wood, materials similar to wood,
and plastics. Operation in enclosed spaces is only
permitted with the use of a suitable extraction sys-
tem.
www.scheppach.com
