Idiomas disponibles
Idiomas disponibles
f)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
g)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
h)
Use the unit in a well-ventilated area.
i)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
j)
Keep these instructions for use for future reference. If the product is to be
handed over to a third party, hand it over with this user manual.
k)
Keep packaging components and small installation parts out of the reach of
children.
l)
Keep the device away from children and animals.
m) When using this product together with other devices, also follow the other
instructions for use.
Remember! Keep children and other bystanders safe while operating the
equipment.
2.3. Personal safety
a)
Do not operate this device if you are tired, ill or under the influence of alcohol,
drugs or medication that could impair your ability to operate the device.
b)
The device is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the
device.
c)
Use caution and common sense when operating this device. A moment's
inattention during operation may result in serious personal injury.
d)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
e)
The product is not a toy. Children should be watched to ensure that they do
not play with the appliance.
f)
Important: The metal parts of the lid and housing can be hot and cause burns
to the skin.
2.4. Safe use of the device
a)
Do not use the device if the ON/OFF switch does not function properly (does
not turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
b)
Disconnect the device from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
