AMATECH P150830530 Instrucciones De Uso página 12

INSTRUCTIONS FOR USE
3 Equipment Setup and Use:
3.1 Prior to use:
a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.
3.2 Setup:
Before Using Power-Lift Stirrup:
The Power-Lift Stirrups (see Figure 2-1) are a non-invasive medical device
designed to provide safe, comfortable support and independent, secure
positioning for the patient's legs during surgery.
The Power-Lift Stirrups attach to U.S. standard side rails only, next to the patient's
hip, using two rail clamps. The patient's foot and lower leg are secured into the
well-cushioned, contoured boot (uniformly supporting the leg weight). By turning
the release handle at the distal end of the leg holder, the caregiver is able to
align the toe, knee, and opposite shoulder simultaneously adjusting- the lithotomy
and abduction angles while keeping both left and right positions in phase.
The Power-Lift Stirrups will be used in surgical procedures such as laparoscopic
assisted vaginal hysterectomies and Nissen Fundoplication's.
Power-Lift Stirrups are rated for use with patients up to 6' 7" (2007 mm) tall and
weighing up to 500 lbs (226 kg). User must verify patient weight capacity of the
surgical table with this accessory applied. Before using stirrups, ensure there are
no scratches, dents, or change in appearance. Verify locking handle and clamp
work properly.
Document Number: 80028296
Version: A
Figure 2-1. Power-Lift Stirrups Components
Page 12
Issue Date: 19 MAR 2020
Ref Blank Template: 80025118 Ver. E