Idiomas disponibles
Idiomas disponibles
GB
Safety
This symbol highlights useful tips and recommendations, as well as information for
effi cient and smooth operation.
1.2
Symbols in the instructions
Assembly
Note the value
See the specifi ed page of this
operator's manual.
Indicates the positions to be
lubricated during the assembly.
See page 42 for further
information on lubrication and
lubrication intervals.
1.3
Intended use
The PTO drive shaft is designed to exclusively transfer power output between the drive unit or tractor
and the driven machine. To ensure safe operation, the values specifi ed in the chapter on power output
data (see page 31) must not be exceeded.
1.4
Foreseeable misuse
Any use which goes beyond the intended use is deemed as misuse and may lead to serious hazards.
The following activities in particular are not permitted:
•
The use of the PTO drive shaft without the intended personal protective equipment.
•
A manual increase of the clutch torque.
•
Incorrectly attaching the driven machine.
•
Exceeding the rated speed during operation (540 RPM, 1000 or 1300 RPM).
•
Operation with insuffi cient overlap of the PTO drive shaft profi les.
•
The use of PTO extensions / adapters.
•
The use of unauthorised components during service.
•
Non-compliance with the maintenance intervals.
•
Incorrectly attaching the PTO drive shaft. (Tractor-end clutch)
Disassembly
Use the noted value
Observe the machine
manufacturer's documentation!
Maintenance once per season or
after a specifi ed interval
27
