Idiomas disponibles
Idiomas disponibles
Tips and tricks
■
To make meat more tender and speed up the grilling process, you can
marinate it beforehand. An ideal basis for this can be sour cream, red wine,
vinegar, buttermilk or fresh papaya or pineapple juice, for example. Add
herbs and spices according to taste. Do not add salt as this can draw water
out of the meat and make it dry. Place the meat in the marinade so that it is
completely covered and close the container. Ideally, leave it overnight.
The griddles 7 have a non-stick coating, therefore extra fat is not necessary.
■
If you still wish to use fat, please ensure that the fat/oil is suitable for
grill-roasting, e.g. rapeseed oil.
■
If you are not sure whether the food is cooked all the way through, you can
use a commercially available meat thermometer.
Cleaning and care
WARNING! RISK OF ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
►
Before cleaning, pull out the plug and wait until the appliance has
completely cooled down. Risk of injury!
►
Never clean the appliance under running water and never immerse it in
water. The appliance could be irreparably damaged!
CAUTION! PROPERTY DAMAGE!
►
To avoid irreparable damage to the appliance, ensure that no moisture gets
into it during cleaning.
►
When cleaning the surfaces use neither abrasive or chemical cleaners, nor
sharp or scratchy objects.
1) After the griddles 7 have cooled down, drag the cleaning scraper 8 over
the griddles 7 so that any fat and residues are scraped together or fall into
the juice collector 9. This makes fat and residues easier to remove.
2) Wipe the griddles 7 with a damp cloth. Do not use any abrasive cleaning
agents, rough sponges or sharp objects for cleaning as these could damage
the non-stick coating.
3) For stubborn crusting, lay a wet cloth on the baked-on residues to soften them.
4) Empty the juice collector 9. We recommend removing the worst greasy
residues with kitchen paper or similar so that the grease does not block up the
sink. Clean the juice collector 9 afterwards in warm water with a mild
detergent. Rinse out the juice collector 9 with fresh water and dry it.
5) A damp cloth is sufficient for cleaning the exterior surfaces. Ensure that all
parts are completely dry before re-using the appliance.
SPM 2000 F3
GB │ IE
│
11
■
