TRAPP Master 500L Manual De Instrucciones página 25

www.trapp.com.br
Replacement of the nylon line
The life of the nylon line depends on the skill

the operator has to avoid contact with stones,
walls, fences and sidewalks. Frequent contact
with those obstacles cause premature wear
out of the nylon line.
To substitute it, get a refill containing the spool

and the nylon line from TRAPP technical
assistance shop or from specialized dealers.
How to remove and replace the spool
Make sure the equipment is unplugged.

Turn the lawn mower/trimmer upwards.

Hold the spool base (6) with one hand and

with the other remove the spool cover (1)
turning it counterclockwise (as shown in the
spool cover).
After removing the spool (3), thoroughly clean

the equipment base, taking care not to allow
grass to fall in the motor compartment.
To replace the spool, pass the tip of the nylon

line (4) through hole (2), fit the spool on cover
(1), align the spool cover on the base guide
(5), press it downward and turn it clockwise
until you hear a "click".
1
3
7
6
Image merely illustrative
When substituting the spool, refer to TRAPP codes:
Model
Master 500L/Super 500
Master 700L/Super 700
Master 800/1000 Plus and
Super 800/1000 Plus
Master 800/1000L, Super 800/1000 and
Master AT 1500/1800
Turbo Master 1500/1800 e Super Turbo
1500/1800
Attention!
Whenever substituting the spool (refill),
keep the spring (7) to reuse it.
How to refill the spool
Should you prefer to refill the spool by yourself:
Use only nylon wire of the recommended

diameter for your equipment model (see
"Technical Specifications"), otherwise it may
cause damage to the motor and the automatic
feed system .
Remove the spool and the rest of the nylon line.

Take one end of the wire and pass it through

hole (1) as shown in the picture.
Wind the wire in the direction indicated

by the arrow on the spool as uniformly
as possible. Follow the maximum length
2
recommended for your equipment (see
"Technical Specifications").
4
5
Image merely illustrative
Code
2120-028
2120-028
2120-331
2120-004
2120-004
1
25