TRAPP Master 500L Manual De Instrucciones página 20

Cortacéspedes y podaderas eléctricas
Ocultar thumbs Ver también para Master 500L:
Idiomas disponibles

Idiomas disponibles

Additional Safety and Operation Instructions
When cutting the grass, always wear proper

footwear, protective goggles and pants.
Walk; do not run.

Always be careful with your steps in inclined

areas (slopes and small elevations).
Wear non-skid footwear in inclined areas.

Use the equipment during daylight or under

good lighting only.
Disconnect the equipment from power supply

(remove it from wall outlet) whenever:
a) You move away from the equipment.
b) Before getting rid of an obstacle.
c) Before inspecting, cleaning or maintaining
the equipment.
d) After hitting a foreign object.
e) The equipment starts vibrating in an
unusual way.
TRAPP lawn mowers/trimmers are classified
as Protection Class II - Double or Reinforced
Insulation. Manufacturing follows a series of
constructive requirements such as standardized
drive keys, cords and motors, flow distances and
gap between the energized parts. The materials
used meet safety requirements of household
appliances and similar products by INMETRO,
Ordinance 371. Despite that double insulation,
the safety precautions described in this manual
shall be followed.
20
Recommendations on use, type and maximum

length of extension cord to be used (see
"Table for the Correct Use of the Extension
Cord") (cords follow Standard ABNT, NBR,
NM 60335-1, clause 25.7).

Use only original spare parts and perform

regular maintenance only at TRAPP authorized
service centers.
When the machine is not in use, store it out of

the reach of children.
Double Insulation
Electric equipment built with this insulation
system do not require a ground wire.
Warning:
The double insulation does not substitute the
precautions to be taken when using the lawn
mower/trimmer. It is an additional safety
feature against accidents that may be caused
by a failure of the equipment insulation system.
Warning!
Whenever cleaning or maintaining the
equipment, first make sure it is off and
then unplug it.
www.trapp.com.br
loading