TRAPP Master 500L Manual De Instrucciones página 18

Congratulations!
You have just acquired a quality product developed with TRAPP's state-of-the-art technology.
This product was designed to work quickly and efficiently, providing total safety at low cost.
Some care is therefore necessary. The important safety measures stated in this Instructions
Manual do not cover all possible situations that may occur during usage. The operator shall
understand that common sense, attention and care are factors that can not be incorporated
to the product, but that have to be supplied by the people that handle the product and that
maintain it.
Attention!
Please read all instructions contained in this
manual to become familiar with the controls
and proper use before operating the equipment,
always observe and follow the safety indications
to prevent accidents and/or injuries.
This product is not intended to be used by

persons (including children) with reduced
physical, sensorial or mental capacity or by
those lacking experience and knowledge.
Children should be supervised to ensure that

they do not play with the appliance.
Before turning on the lawn mower/trimmer -

Make sure the voltage of the power source
(127 V or 220 V) is the same of the equipment.
Never use the lawn mower/trimmer without

the protection device - as the cutting blade
that adjusts the length of the nylon line
is attached to it, avoiding overload and
consequent burning of the motor.
Never use metal cutting elements. 
For longer life of the nylon line - avoid putting

it in contact with stones, walls, fences and
sidewalks.
18
Important Recommendations
Do not operate the equipment in the presence

of people, specially children, or pets. The
operator or user is responsible for accidents
and for the risk posed to other people in the
property.
Never use the lawn mower/trimmer in the

rain or wet locations.
The motor used in the lawn mower/trimmer - is

of universal type. At every 300 hours check
for brushes (coal) wear out and if necessary,
substitute them. Look for the nearest TRAPP
technical assistance shop.
If you need maintenance and spare parts, get in
touch with you local distributor or an authorized
technical assistant:
In case of further difficulties, get in touch with:
METALÚRGICA TRAPP LTDA.
Av. Pref. Waldemar Grubba, 4545 - Cx.P. 106
89256-502 Jaraguá do Sul - SC - Brasil
Phone: +55 47 3371-0088 / +55 47 2107-8800
Fax: +55 47 3371-1997
e-mail: [email protected]
www.trapp.com.br