Idiomas disponibles
Idiomas disponibles
d)
Under abusive conditions, liquid may be ejected from the battery.
Avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, seek additional medical help. Liquid ejected from the
battery may cause irritation or burns.
e)
Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
6)
Service
a)
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
ADDITIONAL SPECIFIC SAFETY RULES
1.
Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact
with a "live" wire will make exposed metal parts of the tool "live" and shock
the operator.
2.
Be aware that this tool is always in an operating condition, because it
does not have to be plugged into an electrical outlet. Always set the trigger
switch to the locked OFF position when installing or removing the battery
pack or saw blade.
3.
Keep blades sharp. Sharp blades will do the job better and safer.
4.
Keep hands away from cutting area. When sawing never reach
underneath or behind the material being cut for any reason.
5.
When you have finished a cut, be careful not to come into contact with the
blade. Turn off the motor immediately.
6.
certain that there are no foreign objects such as electrical wire, conduit,
plumbing pipes, etc. that may come into contact with the blade.
7.
Never hold work in your hand, lap, or against other parts of your body
when sawing.
8.
Wear eye and hearing protection. Always use safety glasses. Everyday
eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT.
Eye protection equipment should comply with ANSI Z87.1 standards.
Hearing equipment should comply with ANSI S3.19 standards.
9.
other airborne particles, including wood dust, crystalline silica dust
and asbestos dust. Direct particles away from face and body. Always
operate tool in well ventilated area and provide for proper dust removal.
Use dust collection system wherever possible. Exposure to the dust may
cause serious and permanent respiratory or other injury, including silicosis
(a serious lung disease), cancer, and death. Avoid breathing the dust, and
avoid prolonged contact with dust. Allowing dust to get into your mouth
or eyes, or lay on your skin may promote absorption of harmful material.
Always use properly fitting NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure, and wash exposed areas with soap and
water.
Exercise extreme caution when blind cutting to be
Use of this tool can generate and disburse dust or
6
