Additional Specific Safety Rules - Porter Cable 543 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ADDITIONAL SPECIFIC SAFETY RULES

1.
Hold power tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own
cord. Contact with a "live" wire will also make exposed metal parts of the
tool "live" and shock the operator.
2.
Use clamps or other practical way to secure and support the workpiece
to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
3.
Keep blades sharp. Sharp blades will do the job better and safer.
4.
Keep hands away from cutting area. When sawing never reach
underneath or behind the material being cut for any reason.
5.
When you have finished a cut be careful not to come into contact with
the blade. Turn off the motor immediately.
6.
wire, conduit, plumbing pipes, etc., that may come into contact with the
blade.
7.
Wear eye and hearing protection. Always use safety glasses. Everyday
eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT.
Eye protection equipment should comply with ANSI Z87.1 standards.
Hearing equipment should comply with ANSI S3.19 standards.
8.
crystalline silica dust and asbestos dust. Direct particles away from
face and body. Always operate tool in well ventilated area and provide
for proper dust removal. Use dust collection system wherever possible.
Exposure to the dust may cause serious and permanent respiratory or other
injury, including silicosis (a serious lung disease), cancer, and death. Avoid
breathing the dust, and avoid prolonged contact with dust. Allowing dust
to get into your mouth or eyes, or lay on your skin may promote absorption
of harmful material. Always use properly fitting NIOSH/OSHA approved
respiratory protection appropriate for the dust exposure, and wash exposed
areas with soap and water.
Exercise extreme caution when blind cutting. Be
certain that there are no foreign objects such as electrical
Use of this tool can generate and disburse dust or
other airborne particles, including wood dust,
SAVE THESE INSTRUCTIONS!
7
Tabla de contenido
loading

Tabla de contenido