Idiomas disponibles
Idiomas disponibles
Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Wash the work vehicle completely.
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Repair any damaged or worn parts.
4) Check that the main fixing nuts and bolts are tight.
5) Check the lubricant level in the gearbox and if neces-
Safety advice for maintenance
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary
maintenance envisaged in the instruction manual.
Maintenance interval schedule
To guarantee constant, efficient and safe machine op-
eration, ensure all the maintenance envisaged by the
Interval
Component
Motorised digging shaft
Cutting discs
Rod conveyor
Every hour
Rear conveyor
Rod conveyor rollers
Rear wheels
Every day
Driveshaft
Transmission chain
Digging shaft chain
Every 50 hours
Nuts and bolts
Every 100 hours
Gear box
Every 2000 hours Gear box
English language
INFORMATION FOR USE
sary top up (see "Checking the gear box oil level").
6) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
7) Park the machine carefully on flat ground in a dry
area protected from the weather.
8) Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
MAINTENANCE INFORMATION
Special maintenance operations (non included in
this handbook) require a specialised workshop on
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
manufacturer is carried out.
Maintenance intervals
Type of work
Cleaning
Greasing
Lubrication
Lubrication
Check of nuts and bolts
tightening torque
Oil level check
Oil change
20
Manual reference
See "Lubrication points diagram"
See "Lubrication points diagram"
See "Lubrication points diagram"
See "Checking nut and bolt tight-
ness"
See "Checking the gear box oil
level"
See "Gearbox oil change"
Use and maintenance
6
7
