Idiomas disponibles
Idiomas disponibles
MN005642A01-AR
Chapter 12 : Emergency Operation
12.6
Exiting Emergency Operation
If an Emergency operation is triggered on your radio, the dispatch console or radios configured as
Supervisor can exit the Emergency operation.
Procedure:
Perform one of the following actions:
If...
12.7
Exiting Emergency as Supervisor (Trunking Only)
Radios configured as Supervisor are able to cancel emergency mode of other radios. The dispatch
console must be preprogrammed to use this feature. For more information, contact your system
administrator.
Procedure:
1 Perform one of the following actions:
If...
If the emergency mode is initi-
ated by other radios,
If the emergency mode is initi-
ated by the Supervisor,
NOTE: The combinations of the following buttons are supported in your radio:
•
Radio 1-Dot (Side Middle) and Top (Orange) buttons.
•
Radio 1-Dot (Side Middle) and accessory Top (Orange) buttons.
•
Accessory 1-Dot Button and radio Top (Orange) button.
•
Accessory 1-Dot Button and accessory Orange button.
62
Then...
Press and hold the preprogrammed Emergency button until
you hear the emergency exit tone.
a From the Home screen, swipe down the Status Bar.
b Tap Cancel and confirm the action by tapping Yes.
Then...
press and hold the 1-Dot (Side Middle) button, and press
the Emergency button.
Perform one of the following actions:
•
Press and hold the Emergency button.
•
Press and hold the 1-Dot (Side Middle) button, and
press the Emergency button.
•
Wait for console to clear emergency.
