Idiomas disponibles
Idiomas disponibles
3.2
ViQi
ViQi is a virtual assistant that helps you manage your radio and perform information lookups using
voice commands. This feature is purpose-built for public safety and is active when you press the
assigned ViQi button on the radio or an associated Remote Speaker Microphone (RSM). This feature
is purpose-built for public safety and is active when you press the assigned ViQi button on the radio,
Remote Speaker Microphone (RSM), or compatible mobile microphone.
ViQi Voice Control
ViQi Voice Control allows you to operate the radio with your voice, for example, to change zones,
channels, or volume.
NOTE: Voice Control follows the language that you set in the device. If you changed the device
language in RadioCentral or Customer Programming Software (CPS), your device automatically
downloads the new language files for this feature through LTE or Wi-Fi. This feature is disabled
until the languages files are downloaded successfully. Therefore, retry if your download fails.
Table 5: ViQi Voice Control Commands
The following table shows the functions supported by the ViQi Voice Control feature and their
respective commands.
Feature
Zone and Channel
Zone
Channel
Examples
To identify your current zone and channel, say:
•
"What is my zone and channel"
•
"Current zone and channel"
•
"Zone and channel"
To change to a new zone and channel, say:
•
"Zone <Zone Name>, channel <Channel Name>"
•
"Change zone to <Zone Name>, channel to <Channel Name>"
•
"Switch zone to <Zone Name>, channel to <Channel Name>"
To identify your current zone, say:
•
"What is my zone"
•
"Current zone"
•
"Zone"
To change to a new zone, say:
•
"Zone <Zone Name>"
•
"Change zone to <Zone Name>"
•
"Switch zone to <Zone Name>"
To identify your current channel, say:
•
"What is my channel"
•
"Current channel"
•
"Channel"
To change to a new channel, say:
MN005642A01-AR
Chapter 3 : Radio Overview
23
