Mounting The Table; Installing Bevel Scale Indicator - RIDGID BS1400 Manual Del Propietário

Mounting the Table

1. From the loose parts find the following
items:
1 Table
2 Knobs
2. To mount table, remove table insert
and table pin from the table. Guide
sawblade through slot in table and
place table screws into trunnions.
Attach and lock with lock knobs.

Installing Bevel Scale Indicator

1. From the loose parts find the following
items:
1 Pointer
1 Screw Pan Head M5 x 0.8-6
2. Insert screw through the slot in the
pointer and into the trunnion support
bracket. Tighten
WARNING: Unit is shipped with
blade installed. Do not plug in or
operate unit unless the blade is
adjusted and aligned per section
titled "Changing Blades".
3. Replace table insert and table pin.
4. Transportation and handling may have
caused some fasteners to loosen.
Before operating, check all screws,
bolts and nuts to make sure they are
snug. Operate machine only after read-
ing the entire manual including blade
tracking, blade guide adjustments, and
safety rules.
Screw Pan Head
M5 x 0.8-6
21
Pointer
Trunnion
Support
Bracket