Idiomas disponibles
Idiomas disponibles
USING THE STAND MIXER
Insert attachment shaft housing into
attachment hub, making certain that
attachment power shaft fits into
square attachment hub socket� It may
3
be necessary to rotate attachment
back and forth� When attachment
is in proper position, the pin on the
attachment will fit into the notch
on the hub rim�
5
Plug into proper electrical outlet�
Loosen attachment knob by
turning it counterclockwise� Rotate
7
attachment slightly back and forth
while pulling it out�
NOTE: See the Use and Care Guide of each specific attachment for recommended
speed settings and operating times�
16 | USING THE STAND MIXER
W11341955A.indd 16
Tighten attachment knob by turning
4
clockwise until attachment is
completely secured to Stand Mixer�
To remove: Turn speed control
6
to "0"� Unplug Stand Mixer�
Replace attachment hub cover�
8
Tighten attachment knob by turning
it clockwise�
3/12/2019 6:47:12 PM
