Idiomas disponibles
Idiomas disponibles
Information
OSM Warning
OSM Warning menus disappear with Exit button.
NOTE: If "
01b_English
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSM control settings back to the
factory settings. Individual settings can be reset by highlighting the control to be
reset and pressing the RESET button.
DISPLAY MODE
Provides information about the current resolution display and technical data
including the preset timing being used and the horizontal and vertical
frequencies.
Increases or decreases the current resolution. (Analog input only).
MONITOR INFO
Indicates the model and serial numbers of your monitor.
NO SIGNAL: This function gives a warning when there is no Horizontal or
Vertical Sync Signal present and advises you to check all Video Inputs on the
monitor and computer to make sure they are properly connected. After power is
turned on or when there is a change of input signal or video is inactive, the No
Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with optimized
resolution. After power is turned on or when there is a change of input signal or
the video signal doesn't have proper resolution, the Resolution Notifier window
will open. This function can be disabled in the TOOL menu.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a change of
input signal or the video signal doesn't have proper timing, the Out Of Range
menu will appear.
CHANGE DVI SELECTION" is displayed, switch to DVI SELECTION.
17
English-11
2/26/02, 10:06 AM
