Idiomas disponibles
Idiomas disponibles
Tilt
Grasp both sides of the monitor screen with your hands and adjust the tilt as desired.
(Figure F.1).
The movable scope for elevation and depression of LCD is -5°~30°angle. (Figure F.2).
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a non-abrasive surface (Place the screen on a 36 mm platform so
that the stand is parallel with the surface.) (Figure G.1).
3. To take off back cover, please follow the instructions of arrow while pressing two side of monitor.
(Figure G.2).
Next, lift up the stand, dismantle upper cover, then go on to dismantle the stand cover.
(Figure G.3).
Return the stand to its original position, remove the 4 screws that connect the monitor to the
stand, and lift off the stand assembly. (Figure G.4).
4. Reverse this process to reattach stand.
NOTE:
Use only VESA-compatible alternative mounting method.
01b_English
Figure F.1
36mm
Figure G.1
12
-5°
Figure F.2
English-6
2/26/02, 10:06 AM
-30°
