Idiomas disponibles
Idiomas disponibles
A - PV - measured (current) temperature value
B - SV - set (target) temperature value
C - Heating activation button
D - R/MIN - Rotational speed of the agitator (presented in rpm)
E - "SET" button - enables setting the temperature and mixing speed values
F - "R/AT" value - automatic calibration / change of the location of digit edition on
the display
G - "-" button - reducing the mixing speed or temperature
H - "+" button - increasing the mixing speed or temperature
I - Mixing activation button
3.2.
LOCATION OF THE DEVICE
Position the device in a way that allows for good air circulation. Maintain a
minimum distance of 10 cm from any wall. Keep the device away from any hot
surfaces. Always operate the device on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons with reduced mental, sensory
and intellectual abilities. Position the device in such a way that the power supply
plug can be reached at any time. Make sure that the device's power supply
corresponds to the data on the rating plate!
SET ASSEMBLY
1. Place the flask with 3 necks [2] in the jacket [1].
Preparation for work
