Idiomas disponibles
Idiomas disponibles
The term "device" or "product" in the warnings and instructions refers to the SHORT
PATH DISTILLATION APPARATUS.
2.1.
a)
The device plug must fit into the socket. Do not modify the plug in any way.
Original plugs and matching sockets reduce the risk of electric shock.
b)
Avoid touching earthed items such as tubes, radiators, heaters and
refrigerators. There is an increased risk of electric shock if your body is
earthed and touches the device exposed to direct rain, wet floor and humid
environment. If water penetrates into the device, there is an increased risk of
damage to the device and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cable in a wrong way. Never use it to carry the device or to
pull the plug out of the socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled cables increase the risk of
electric shock.
e)
If you cannot avoid using the device in a wet environment, use a residual
current device (RCD). Using an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cable is damaged or shows clear signs of
wear. A damaged power cable should be replaced by a qualified electrician or
the manufacturer's service.
g)
To avoid electric shock, do not immerse the cable, plug or device itself in
water or other liquid. Do not use the device on wet surfaces.
2.2.
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be careful, watch what you are doing and use common sense when
working with the device.
b)
Do not use the device in an area with a risk of explosion, for example in the
presence of flammable liquids, gases or dust. The device produces sparks
which can ignite dust or vapours.
c)
In the event of damage or malfunction of the device, it must be switched off
immediately and the incident must be reported to an authorised person.
d)
If in doubt as to whether the device is working properly, contact the
manufacturer's service.
e)
Repairs to the device may only be carried out by the manufacturer's service.
Do not carry out repairs yourself!
f)
In the event of fire or fire, use only powder or snow (CO2) extinguishers to
extinguish fire in the device where there is voltage.
Electrical safety
Safety in the work area
