Bosch GWX18V-13C Instrucciones De Funcionamiento Y Seguridad página 15

Disconnect battery pack from tool before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of
starting the tool accidentally.
Fig. 5
(7)
Inserting the Bluetooth
Connectivity Tool Module
Read the corresponding operating instructions
for information about the Bluetooth® Connectiv-
ity Tool Module.
Installing Side Handle
The Side Handle (Fig. 5, 7) is used to control
and balance the tool.
Securely thread handle into either side of gear
housing, depending on personal preference,
comfort, and operation being performed.
The handle should always be installed onto the
guard protected side of the tool, see figure 7.
Use the side handle for safe control and ease of
operation.
160992A5K0 GWX18V-13CP 202206.indd 15
Assembly
(6)
(Sold separately)
Hand Shield
(sold separately)
The Hand Shield (Fig. 5, 6) is to be used with
backing pads, sanding discs, and wire brushes
to keep fingers and hand away from work sur-
face, sharp edges, burrs and debris.
When using the hand shield, insert side handle
through hole in shield and then thread into
housing (Fig. 5). Ensure that hand shield is posi-
tioned between hand and backing pad, sanding
disc or wire brush.
-15-
6/27/22 7:17 AM