Idiomas disponibles
Idiomas disponibles
5.2
Connecting the Device to the Testing or
Laboratory Device (YDP30 Only)
Procedure
Connect one of the printer connection cables to the
t
appropriate port on the device and the testing or laboratory
device (for information about ports on the testing or
laboratory device, see the testing or laboratory device's
operating instructions) .
5.3
Connecting the Device to the Wi-Fi
Router or Corporate Network (YDP30-NET
Only)
Multiple testing and laboratory devices can access the device .
Depending on the configuration, the testing or laboratory
devices can access the device via an independent Wi-Fi router
or via a corporate network .
Connection Type
Connection of Device and
Testing or Laboratory Device
Access via Wi-Fi router
− The device is connected to
(independent Wi-Fi
network)
− The testing or laboratory
Access via corporate
− The device is connected to
network
− The testing or laboratory
Requirements
− The device and the Wi-Fi router are turned off .
− The testing or laboratory device is enabled and prepared for
Wi-Fi operation (see the testing or laboratory device's
operating instructions) .
Procedure
Check the suitability of the Wi-Fi router or the corporate
t
network (for suitability see Chapter "13 .4 Operating Modes
and Connection Types", page 24) .
Connect a network connection cable to the "Ethernet" port
t
and to the Wi-Fi router or corporate network .
the Wi-Fi router via a
network connection cable .
device is connected to the
Wi-Fi router via Wi-Fi
components .
the corporate network via a
network connection cable .
device is connected to the
corporate network via Wi-Fi
components .
Connection Type Advantage
− Printing can take place via
an independent Wi-Fi
network .
− The device can be used
without considering the
corporate network's
security guidelines or
network settings .
− Fewer connection cables are
required .
− No Wi-Fi router is required .
− All Wi-Fi functions of the
testing or laboratory device
can be used .
Operating Instructions YDP30 | YDP30-NET
Getting Started
Connection Type
Disadvantage
Only the Wi-Fi print function
of the testing or laboratory
device can be used .
The device does not support
fixed IP addresses . For this
reason, the Wi-Fi functions of
the testing or laboratory
devices may be restricted, e .g .
only standard authentication
methods are available .
11
