Connecting the Printer
Power Supply
Use only the AC adapter supplied
Use only the AC adapter supplied
!
!
!
!
!
Use only the AC adapter supplied
Use only the AC adapter supplied
Use only the AC adapter supplied
with the printer.
with the printer.
with the printer.
with the printer.
with the printer.
– The DC jack is located on the rear
panel of the balance, scale or
indicator.
– Please follow the operating
instructions enclosed.
Configuring the Printer
Interface
Adjust the following settings in the
Setup menu of the balance, scale or
indicator connected (see also the
Operating Instructions of the particular
model connected to the printer):
Combics and isi models:
– Printer:
– Baud rate:
– Parity:
– Number of stop bits: 1 stop bit
– Handshake mode:
LA and FC models
– Printer:
All manuals and user guides at all-guides.com
Universal
9,600 baud
None
Hardware
handshake
YDP02IS
Operating Modes and
Paper Recognition
Printer Operating Modes
(Page Mode / Line Mode)
The YDP12IS printer can be used in
2 different operating modes:
– "Page Mode" for operation as a label
printer (factory setting)
– "Line Mode" for operation as a strip
printer (for use with continuous paper)
When using automatic paper recog-
nition, the operator can obtain infor-
mation on the current operating mode
by viewing the status message (see
also the section "Activating Paper
Recognition").
The status message is printed and, in
addition to other information (such as
the software version), contains the
message "Line Mode" or "Page Mode"
in the third line.
The normal operating mode for the
YDP12IS printer is "Page Mode." If the
printer does not print, it may currently
be in the "Line Mode."
To switch between the two modes,
use the "FEED" button.
3