Bosch PKS 40 Manual De Instrucciones página 17

OBJ_BUCH-179-002.book Page 4 Thursday, June 29, 2006 11:08 AM
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Intended Use
The power tool is intended for cutting wood lengthways
and crossways in straight lines and at bevel angles of
up to 45° on a firm surface.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Lock-off button for On/Off switch
3 Allen key
4 Auxiliary handle
5 Scale for mitre angle
6 Wing bolt for bevel-angle preselection
7 Wing bolt for parallel guide
8 Cutting mark, 45°
9 Cutting mark, 0°
10 Parallel guide
11 Retracting blade guard
12 Riving knife
13 Base plate
14 Wing bolt for cutting depth preselection
15 Cutting-depth scale
16 Blade guard
17 Sawdust ejector
18 Clamping bolt with washer
19 Open-end spanner, size 22 mm*
20 Clamping flange
21 Saw blade*
22 Mounting flange
23 Motor spindle
24 Screw for attachment of riving knife
25 Set of screw clamps*
26 Guide-rail adapter*
27 Guide rail*
28 Connection piece*
29 Vacuum hose*
*The accessories illustrated or described are not
included as standard delivery.
2 609 001 819 • 29.6.06
Technical Data
Circular Saw
Article number
Rated power input
Output power
No-load speed
Rotational speed under load,
max.
Riving knife thickness, max.
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 97 dB(A); sound power level
108 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
The typically weighted acceleration is 3.5 m/s
The vibration emission level given in
WARNING
this information sheet has been meas-
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
English–4
PKS 40
3 603 C28 0..
W 600
W 350
rpm 4500
rpm 2450
mm 1.5
mm 40
mm 26
mm 120 x 260
mm 130
mm 122
mm 1.4
mm 2.7
mm 1.7
mm 16
kg 2.4
/ II
2
.