Idiomas disponibles
Idiomas disponibles
C
Using the appliance
Installation steps
• The cooker is designed to fit between kitchen cabinets. The space either side need only be
sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinet one side
or both as well as in a corner setting. It can also be used free-standing.
• The appliances can be installed next to furniture units which are no taller than the top of the
cooker hobs. If the cooker is placed touching walls or sides of neighboring cabinets, these must
be capable of withstanding a temperature rise of 50 °C above room temperature. For a correct
installation of the cooker the following precautions must be followed:
- The cooker may be located in a kitchen, a diner or bed sitting room, but not in a bathroom or
shower room.
- Kitchen cabinets installed next to the cooker that are taller than the top of the cooker hobs
must be situated at least 20cm from the edge of the hobs.
- Hoods must be installed according to the requirements in the installation manual for the hoods
themselves and in any case at a minimum distance of 65cm.
- Place the wall cabinets adjacent to the hood at a minimum height of 42cm from the hobs as
1
indicated in figure
.
- The hoods must be installed according to the requirements in the hood handbook.
- Should the cooker be installed beneath a wall cabinet, the latter should be situated at least
1
70cm away from the hobs as indicated in figure
.
1
- The cut-out for the cooker cabinet should have the dimensions indicated in the figure
.
- The wall in contact with the back of the cooker must be of flameproof material .
15
EN
